imat-plc-header.template

Go to the documentation of this file.

# Control Word: W510       (This word will self-reset to 0)
# W510.00               set true to request Sample Attenuator to Open
# W510.01               set true to request Sample Attenuator to Close
#
# Status Word: W511
# W511.00               true when Sample Attenuator requested to open via HMI or EPICS
# W511.01               true when Sample Attenuator is OPEN
# W511.02               true when Sample Attenuator is CLOSED
#
# 
# Pressures
# The pressure value will be in range 10 to 99 corresponding to 1.0 to 9.9
# The exponent will be something like -3 encoded in two's complement and read back as e.g. 65533 (unsigned) 
# Gauge         Pressure        x10_E   description
# TPG300-1      A1      D100    D101    Section 1 pirani
# TPG300-1      A2      D102    D103    Section 2 pirani
# TPG300-1      B1      D104    D105    Section 3 pirani
# TPG300-1      B2      D106    D107    Spare
# TPG300-2      A1      D108    D109    Section 4 pirani
# TPG300-2      A2      D110    D111    Section 5 pirani
# TPG300-2      B1      D112    D113    Section 6 pirani
# TPG300-2      B2      D114    D115    Spare

record(bo, "$(P)$(Q)SIM")
{
    field(SCAN, "Passive")
    field(DTYP, "Soft Channel")
    field(ZNAM, "NO")
    field(ONAM, "YES")
}